49527
5
Zoom out
Zoom in
Previous page
1/8
Next page
AUG 05, 2002 5 of 8 PD99025-1
Press ‘Stop’ button Stop play back immediately
Note: If there are old and new message recorded, will play new message first. If day/time is not set
properly, the A/M will skip to prompt the day/time. (i.e. No day/time stamp will be announced).
4. Memo recording
Press and hold ‘Memo’ button for 2 seconds A long beep to start memo recording. During memo
recording, the display will shows ‘rE’
Press ‘Stop’ button. A long beep to stop memo recording.
Note: maximum length of memo is 2 minutes.
Recording will be terminated if: 1. STOP button is pressed;
2. memory full (keep message);
3. message exceeds 2 minutes.
5. Delete message
When the machine playing message, press and hold
the ‘Delete’ button for two second.
A long beep will be heard, then prompt ‘Message
deleted’ and delete the current message from memory
then jump to next message. When delete a message
the display shows ‘dE’.
When no message being played, press and hold the
‘Delete’ button for 2 seconds
A long beep will be heard, then prompt ‘All messages
erased' and all old message in memory will be
deleted. The same symbol ‘dE’ will be shows on the
7-segment.
* If there are old and new message it will prompt
‘Message deleted’ & number of new(unread)
message.
Note: All deleted messages cannot be recovered. Unread message cannot be deleted.
6. Speaker & Ringer volume control
Press ‘Vol. Up’ or ‘Vol. Down’ button to adjust
volume
During incoming ring, press ‘Vol. Up or Vol. Down’
key to adjust the ringer level. A short beep to confirm
each key press (there are four levels of volume)
Note: The factory default volume of the speaker & ringer is “level 3”.
7. Remote access
Dial the phone number with the answering machine
connected
The machine will answer and play the announcement.
After the announcement and start beep, press the 3
digits security codes. (or press ‘*’ to skip
announcement)
Two short beeps to notify you have gained access the
machine then use phone keypad to control the
machine. The display symbol is ‘rC’.
Hang up the phone Stop remote control and A/M will be back to standby
mode.
Note: 1. If no key press in 10 second, A/M time out and hang up.
2. If the entry of security code is invalid, it accepts the attempt again as 10 times as it can be
within 3 minutes (normal recording duration). Otherwise, machine will hang up with failure
attempts after 3 min.
3. During remote play back, machine will stop every 165 seconds and wait for user response, if
no response then stop operation and hang up.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG AB350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG AB350 in the language / languages: English as an attachment in your email.

The manual is 0,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG AB350

AEG AB350 User Manual - German, Dutch - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info