49525
4
Zoom out
Zoom in
Previous page
1/8
Next page
AUG 05, 2002 4 of 8 PD99025-1
jump to “set minutes” minute.
Press ‘FF’ or ‘RW’ to select minutes Prompt at each selection.
Press ‘Time’ button to accept setting. Prompt the days, hours and minute then back to
standby or off mode.
Note: If no confirmation within 10 second or the STOP button is pressed during each setting step, the
A/M will keep the old setting.
2.3 Set number of rings to answer, default rings – 3 rings
Press and hold the ‘Ring’ button for 2 seconds A short beep to start set rings, prompt ‘Please set
ring’, pause then prompt & display current rings
number.
Press ‘FF’ or ‘RW’ to select 2 - 9 rings or toll saver Prompt at each selection.
Press ‘Ring’ button to accept setting Prompt setting then back to standby or off mode.
Note: If no confirmation within 10 second or the STOP button is pressed during each setting step, the
A/M will keep the old setting.
2.4 Set security code, default codes - 321
Press and hold the ‘Code’ button for 2 seconds A short beep to start set code, prompt ‘Set security
code’, pause then prompt the first code, display
symbol ‘S1’.
Press ‘FF’ or ‘RW’ to select the 1 st digit Prompt at each selection.
Press ‘Code’ button to accept setting and jump to set
the next digit
Prompt first digit selected and a short beep then
prompt second code, display symbol ‘S2’.
Press ‘FF’ or ‘RW’ to select the 2 nd digit Prompt at each selection.
Press ‘Code’ button to accept setting and jump to set
the next digit
Prompt second digit selected and a short beep then
prompt third code, display symbol ‘S3’.
Press ‘FF’ or ‘RW’ to select 3 rd digit Prompt at each selection.
Press ‘Code’ button to accept setting Prompt the third digit selected and a long beep then
prompt the three selected codes. Then back to standby
or off mode.
Note: Press ‘Stop’ button at any time or the A/M wait for the code key press more than the “10 seconds
time out” limit, the A/M will quit setting and back to standby or off mode. All setting will be unchanged.
3. Message play back
3.1 No message
Press ‘Play’ button Prompt ‘You have no message’
3.2 There is(are) message(s.)
Press ‘Play’ button Prompt number of message and number of new
message, then a short beep + day/time stamp and play
message, then a short beep + day/time stamp and next
message. If there is no more message, a long beep,
prompt ‘End of message’ to end play back
During play back press ‘RW’ button Replay the current message again start from begin
During play back press ‘RW’ twice in a second Backward to the previous message
During play back press ‘FF’ button Skip the current message and go to next message
During play back press ‘Pause’ button The message is pause and lasts for 30 sec. To
continue the playback, press ‘Play/Pause’ button
again. Otherwise, after 30 sec. pause, it stops the
playback mode automatically. During “pause” the
display symbol is ‘| |’.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG AB300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG AB300 in the language / languages: English as an attachment in your email.

The manual is 0,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG AB300

AEG AB300 User Manual - German, Dutch - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info