Voor- en achter-indicatieleds branden, de staart-indicatieled knippert snelGa in normale modus
Voor- en achter-indicatieleds branden, de staart-indicatieled knippert langzaamGa in GPS modus
Waarschuwingen en abnormale status
Voor- en achter-indicatieleds knipperen langzaamLow Power alarm (rst-level low power alarm)
Voor- en achter-indicatieleds knipperen snelExtremely Low Power alarm (second-level low power alarm)
For specic details on indicators, please refer to "Preparing the Quadcopter" in section 2.3 Flight Indicators.
2 Specications
Quadcopter
Accu5300mAh LiPo
Gewicht1,4 kg
StationairvliegnauwkeurigheidHorizontaal: ±2,5 m, vertikaal: ±0,8 m
Maximale kantelhoek30°
Maximale klim/daal snelheidKlimmen: 6 m/; Dalen: 4 m/s
Maximale vliegsnelheid20 m/s (niet aanbevolen)
Diagonale lengte
450 mm
Vliegtijd
20 min
Camera
Omgevingstemperatuur
-20~50°C
Sensorafmeting1/2,3"
Effectief aantal pixels16 Megapixels (MP)
Resolutie4608 x 3456
HD Video opnameMaximaal 1080P/30fps (NTSC systeem), Maximaal 1080P/25fps (PAL system)
Zender
Data/Video zendafstand>700m
Werktijd8 uur
Werkspanning/voltage150mA/6V
Batterij4 AA Batteries
Wi-Fi
Werkfrequentie2,4GHz
Bereik (open, in de buitenlucht)>300m/984ft
Zenderspanning≤ 17dBm
Energieverbruik1,5W
3 Probleemoplossingen
3�1 Oplossing voor zender joystick positioneringsfouten (niet in het midden/centrale positie)
Als de zender joysticks zijn niet in de neutrale stand staat, kan de motor niet starten bij het uitvoeren van CSC. Dergelijke fouten treden meestal in twee gevallen op:
1. Wanneer Quadcopter is ingeschakeld, is de joystick (behalve gas) is niet in de neutrale stand.
Oplossing: Plaats beide zender joysticks in de neutrale stand, start de Quadcopter opnieuw om de neutrale stand vast te leggen. Als het probleem blijft bestaan,
kan het een andere oorzaak hebben;
2� Zender joysticks zijn foutief gecalibreerd, waardoor afwijking in de neutrale stand optreedt, dat wil zeggen, er is een asymmetrie in Quadcopter joystickpositie�
Oplossing: Kalibreer de afstandsbediening opnieuw.
a) Zorg ervoor dat de Quadcopter is uitgeschakeld; Zet S2 op stand 3
S2:
, en zet de zender aan. De foto-indicator (groen) knippert. Vervolgens beide
joysticks
twee keer met de klok mee en tegen de klok in ronddraaien, met de jopysticks zo ver mogelijk naar buiten geduwd� Laat daarna de joysticks los en schakel S2
naar stand 1
S2:OK
, Als de video-opname LED oplicht is de calibratie gereed�
(b) Herstart de Quadcopter, en controleer of het probleem na hercalibratie is opgelost. Als het probleem zich blijft voordoen, stuur dan de zender op voor
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for AEE AP10 Quadcopter at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of AEE AP10 Quadcopter in the language / languages: Dutch as an attachment in your email.
The manual is 4,49 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.