Manual Adler AD 7048 (page 5 of 76) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish)

800004

Zoom out

Zoom in

1/76

19. Do not aim the vacuum cleaner toward other people or animals.

20. The vacuum cleaner may be used only on dry surfaces.

21. Only use accessories designed for this appliance.

22. Use extra care when vacuuming stairs.

23. Do not block any vents.

24. Do not operate the vacuum cleaner without the filter.

25. Do not pull the vacuum cleaner by the hose.

26. Make sure that the power cord is not wedged by a door and does not get jammed.

When moving the vacuum cleaner please note the length of the power cord. Pulling the

vacuum cleaner suddenly when the cord is taut may damage it.

27.Vacuuming dust and residues of construction causes immediate loss of warranty. The

vacuum cleaner is designed for domestic use only.

28. The device is outfitted with a rechargeable battery. Do not throw into a fire, puncture,

crush or damage the battery.

Device Description: (Handheld vacuum cleaner)

1.Battery status 2. Dust Cup Release Button 3. Dust Cup 4. Wand Release Button 5.TUBE 6. Nozzle Release Button

7.Motorized Nozzle 8. Turbo Button 9. ON/OFF Button 10. Battery Pack Release Button 11. Battery Pack

12.Dust Cup empty Button 13. 2 in 1 Upholstery Brush 14. Long Crevice Tool 15. Charging Adaptor 16. Wall mount

·BATTERIE UNIT

Insert the batteries unit into the bottom of the machine and when it locked into the machine, you will hear the sound of connection. Pay

attention to the direction. (FIG.1)

·DUST CUP ASSEMBLY ASSEMBLED WITH THE MAIN PART

Firstly insert the lower plastic chip into the hole of the main part, then lock the upper cover with the upper lock of the main part. (FIG.2)

CONNECTION OF BRUSH

Insert the upper part into the lower connection of the power tube and can hear the sound of locking. (FIG.3)

CONNECTION WITH TUBE

Insert the upper ends into the main hole of the dust cup and can hear the locking sound (fig4)

Connection of power brush and main machine

Insert the upper part of the power brush into the main hole of the main machine (fig.5)

·Connection of accessory brushes with main machine

Insert the accessory brushes into the main hole of the main vacuum cleaners(FIG. 6,7)

·LOW SPEED, HIGH SPEED, OFF

To turn the device On/OFF press the On/OFF button (9)

Use the TURBO button (8) to shift the speed from low to high.

·Vacuum cleaner charging

Please use the designated adaptor to charge the vacuum cleaner

Plug the adaptor and when charge the light will glow in red when it is full, the light will turn blue

You can recharge the batteries unit alone or within the machine

Clean after each use

Press the upper button (2) to release the dust cup assembly unit (3), then press the lower button to release the dust cup lower cover. It

is recommended to clean the dust cup after using it every time.

Dust cup cleaning

a) Press the button to release the lower cover of the dust cup to empty the dust (FIG.9,10)

b) Take out the filter as fig.14 show and clean or change it. (FIG.11)

c) Clean the filter under running water and dry it under sunlight

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Adler AD 7048 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 4.93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Adler AD 7048 Manual

Product: