738823
4
Zoom out
Zoom in
Previous page
1/56
Next page
water.
21. Do not use when standing. Only use in sitting possition.
22. FIll the device only with water. Do not use any oils or bathing solutions, gels and
substances.
23. If you have any concerns about your health please contact a phisician before use.
Users with heart problems, heart pacemakers, diabedic or other health problems. Pregnant
women and users complaining on prelonged joint and muscle pains. Long lasting and
frequent pains may be warning sighns of serious ilness please consult a Doctor.
24. Do not use the device more than 10 minutes without breaks.
DESCRIPTION OF THE DEVICE (fig 1)
1. casing 2. Power switch knob
3. rollers 4. Attachment with insets
5. “brush” attachment 6. Attachment with wheels
7. Antisplash cover 8. Infrared lamp
DEVICE UTILIZATION
1. Make sure that the device is disconnected from the power, and the power knob is set to “off” position (fig. 2.1).
2. Fill the tank with warm or cold water, depending on your preferences. Do not fill above MAX mark. NOTICE: The device has water
temperature maintaining feature, not water warming feature.
3. Choose one of three attachments (4, 5, 6) and place it in appropriate place of the massager (as shown on fig. 1).
4. Connect the massager to the power. Never unplug the massager if your feet are immersed in water.
5. Sit comfortably and put the feet in the massager. Never stand on the massager.
6. Choose one of available massaging programmes (fig 2).
- 2: Vibration and bubble massage in cold water
- 3: Vibration and bubble massage in warm water, maintaining water temperature, infrared lamp on
- 4: Infrared massage, maintaining water temperature
7. After using the massager switch the power knob to “off” position, remove feet from the water and wipe them dry. Disconnect the
massager from the power circuit.
8. Wait until the device cools, clean according to the description in “Cleaning the device” section.
CLEANING THE DEVICE
1. Make sure that the device is disconnected from the power and is not warm.
2. Never immerse whole device in water.
3. In order to clean the device, use cloth with washing-up liquid. Rinse the massager bowl and wipe dry.
NOTICE: Do not immerse the massager in water or other liquids to avoid water penetrating into the inside of device.
TECHNICAL DATA
Supply voltage: 230V~50Hz
Power: 80W
4
Device is made in class II of insulation.
Device is compliant with EU directives:
- Low voltage directive (LVD)
- Electromagnetic compatibility (EMC)
Device marked CE mark on rating label
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding
waste bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous
components, which may effect the environment. Do not dispose this appliance in the common waste bin.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Adler AD 2167 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Adler AD 2167 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info