799457

Adler AD 1345 Manual

4
Zoom out
Zoom in
Previous page
1/92
Next page
4
25. Descale your kettle regularly. Using kettle with heating element covered by scale may
cause damage.
6. Cover opening button
5. Base
11. MIN / MAX water level indicator
7. Power button (On / Off)
DEVICE DESCRIPTION ELECTRIC KETTLE AD1345
28. Do not wash the base of the kettle directly in the water, just wipe with a dry cloth.
4. Handle
21. Move the kettle only by holding it by handle..
10. Cooking indicator
9. Keep-warm function indicator
BEFORE FIRST USE
29. Children aged 3 to 8 years old can enable and disable the device only when it is in its
normal position of use, they are supervised or instructed on the safe use and understand
the resulting risks. Children aged 3 to 8 years old can not connect device, operate, clean or
maintain.
2. LED display
20. Always use caution when boiling water in the kettle. Do not touch the housing of kettle
or lid. Do not open the lid during boiling in kettle or immediately after boiling, because
steam coming out of lid can cause burns.
Fill the kettle three times with water to the maximum level, boil, and pour out. To remove any factory odor.
8. Temperature selection button
Only touch the buttons on the touch panel (12) with your fingertips, touching your fingernails may damage the touch panel!
BASIC OPERATION:
SINGLE WATER BOLING UP TO 100 °C
24. Never use kettle without filter or with open cover (automatic shutdown will not work).
12. Touch panel
26. Do not use aggressive detergents to wash the kettle housing - they can damage the
kettle or remove the markings.
27. The device is not designed to work with external schedulers or separate remote control
system.
23. Never switch on kettle without water.
1. Lid
3. Housing
22. Never fill kettle above MAX level and below MIN level. It may cause damage of kettle.
5. Press the button (7), the cooking indicator (10) will light up, then the heater will start heating the water and the LED display (2) will start
showing the current water temperature. The temperature of the water will increase until it boils, i.e. up to 100 ° C.
WITH THE TEMPERATURE KEEP-WARM FUNCTION
9. When the appliance is not in use, the LED display (2) will stay on showing the current water temperature.
ADVANCED OPERATION:
4. Insert the plug of the power cord into a 220-240V ~ 50-60Hz mains socket. Put the kettle on the base (5), you will hear the “di” sound,
and the LED display (2) will show the current water temperature.
BOILING WATER TO THE SELECTED TEMPERATURE 40 ℃ OR 55 ℃ / 80 ℃ / 90 ℃
6. After boiling the water, the kettle will automatically turn off, and you will hear a triple sound "di-di-di".
3. Remember to close the kettle with the lid (1) after filling, otherwise, the kettle will not turn off automatically after boiling water.
8. The kettle can be switched on again approximately 2 minutes after the last use.
2. Fill the kettle with water so that the water level is between the maximum and minimum level on the water level indicator inside the
kettle (11).
Put the kettle on the stand (5), and wait until you hear the "di" sound. Press the temperature selection button (8), the LED display (2) will
show the temperature of your choice (40 ℃ or 55 ℃ / 80 ℃ / 90 ℃) and blink four times storing the selected temperature level, the
temperature hold function indicator (9) will light up. Then the LCD display (2) will show the current water temperature inside the kettle.
The kettle will stop boiling water when it reaches the selected temperature level of 40 ℃ or 55 ℃ / 80 ℃ / 90 ℃, you will hear a triple
sound "di-di-di". After reaching the set temperature, the kettle will switch to the temperature maintenance mode and will periodically heat
the water when the water temperature drops by 5 ℃ in relation to the selected temperature level.
In order to interrupt the temperature maintenance function, remove the kettle from its base (5) or press the button (7). The keep-warm
function is maintained for max.24 hours from the last cooking.
7. If you want to turn off the kettle before the boiling water is finished, lift it from the base (5) or press the button (7).
If the water temperature in the kettle is higher than the desired temperature (more than 5 ℃), the indicator of the keep-warm function (9)
will flash until the water cools down to the pre-set temperature of 40 ℃ or 55 ℃ 80 ℃ / 90 ℃), being in the keep temperature mode all
the time.
1. Place the base (5) on a stable, flat, and heat-resistant surface.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Adler AD 1345 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Adler AD 1345 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 4.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info