524616
4
Zoom out
Zoom in
Previous page
1/12
Next page
NL • 4
661Y0400.F
ENGLISHFRANCAISNEDERLANDSESPAÑOLITALIANO
РУССКИЙ
DEUTSCH
LASTENBOEKBESCHRIJVING
Tank-in-tank-systeem
De “tank-in-tank” is een warmtewisselaar met ingebouwde
accumulator en bestaat uit twee concentrische reservoirs:
het intern reservoir bevat sanitair water dat opgewarmd moet
worden (secundair) en het extern reservoir bevat de
verwarmingsvloeistof (primair) die tussen de twee reservoirs
vloeit en haar warmte aan het sanitair water afgeeft.
Accumulator warmtewisselaar
Het intern reservoir vormt het hart van de boiler: het wordt
blootgesteld aan de agressiviteit van het leidingwater, aan
grote druk- en aan temperatuurschommelingen. Dit reservoir is
vervaardigd uit roestvast chroom-nikkelstaal (inox 304 of duplex)
dat volledig gelast is onder bescherming van argon volgens de
T.I.G.-techniek (TIG = Tungsten Inert Gas). Voor de assemblage
worden de bolvormige bodems gebijtst en gepassiveerd om de
levensduur van het reservoir te bevorderen en in het bijzonder de
weerstand tegen corrosie te verhogen. Het reservoir is over de
hele hoogte gegolfd volgens een exclusieve fabricageprocedure.
Dit ontwerp verleent een sterke weerstand tegen de druk en
verhindert de aanhechting van kalk door het uitzetten en krimpen
van het reservoir.
Extern reservoir
Het extern reservoir, dat het water van het primaire circuit
(cv- water) bevat, is vervaardigd uit koolstofstaal STW 22.
Thermische isolatie
Isolatie uit soepel polyurethaanschuim, 30 mm dik.
Behuizing
Bekleed met een dikke laag vinyl polypropyleen deksels.
Elektrische weerstand voor HLE model
De HLE boilers zijn uitgesrust met een 2,2kW elektrische
verwarmingselement, en met een bedieningsthermostaat
INLEIDING
WERKINGSPRINCIPE
Werkingscyclus
De thermostaat sluit en start de laadpomp. Het primaire water
circuleert rond het binnenreservoir en verwarmt zo het sanitair
water. Als de gevraagde temperatuur bereikt is, stopt de thermostaat
de laadpomp.
Verliezen bij stilstand °C/uur
Modellen Verlies in °C/uur
ECO 100 / HL 100 / HLE 100 ΔT = 40°C 0,28
ECO 130 / HL 130 / HLE 130 ΔT = 40°C 0,25
ECO 160 / HL 160 / HLE 160 ΔT = 40°C 0,23
HL 210 / HLE 210 ΔT = 40°C 0,21
HL 240 / HLE 240 ΔT = 40°C 0,21
Temperatuurverlies bij omgevingstemperatuur van 20°C
Koud water
CV-vloeistof
Sanitair warm water
Bij stilstand Bij opwarming Opgewarmd
Tijdens
aftapping
Omschrijving
1. On t lu c hter
2. Buitentank uit plaatstaal
3. Vertrek sanitair warm water (secundair)
4. Beschermhuls met voeler regelthermostaat
5. Elektrische weerstand gemonteerd in het CV circuit (HLE alleen)
6. Onder en boven isolatie in polystyreen schuim
7. Deksels in polypropylen
8. Isolatie uit soepel polyurethaanschuim
9. Binnentank uit roestvrij staal
10. Terugloop sanitair water
11. Voeding CV (primair)
12. Voeding sanitair koud water (secundair)
4
3
10
1
9
11
8
2
12
6
5
7
7
12
10
1
9
11
8
2
3
7
7
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ACV ECO 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ACV ECO 100 in the language / languages: Dutch as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info