Page Section
1 Introduction
2 Handling
1 3 Installation
1 4 Positioning
2 5 Connecting
3 6 Controls and System Setup
4 7 Specification
5 8 The Linear Range
5 9 Warranty
5 10 Contact Acoustic Energy
3. Installation
Welcome to the Linear Sub. Perhaps more than
any other hi-fi product, speakers are sensitive to
installation so please take a little time to read
this manual and to follow, as far as practical,
the installation guidelines it contains. Careful
installation will help ensure that your Linear Sub
performs optimally. Should you have any questions
not covered here we are happy to try and answer
them either by telephone or email. Contact
information can be found in Section 11.
Following this introduction, the Manual is divided
into sections covering handling, installation,
positioning, connecting, controls and system setup,
specifications, matching products, warranty and
contact information. We recommend that you read
at least the first six of these sections carefully before
installing and using your Linear Sub. We would also
draw your attention to the Mains Power Safety
Warnings on this page.
Finally, please enjoy your Linear Sub, but remember
it is capable of generating high volume levels of
low frequency sound, so please also be considerate
of your neighbours.
The Linear Sub is a relatively delicate precision
engineered product that can be damaged by
inappropriate handling. It is also large and heavy.
Please take great care therefore when unpacking
or moving it. Plan any handling in advance of
carrying it out - ideally with a second person to
help. Please take care when unpacking or moving
the subwoofer not to touch any of the drivers.
Damage to a driver will at best degrade the
Linear Sub’s performance and at worst result in its
complete failure.
The enclosure surfaces should also be handled
sympathetically. Any cleaning should only require a
soft cloth, slightly dampened if necessary. Be wary
of using any polishes or solvent based cleaning
agents.
The packaging should be retained for future use.
Contents
Mains Power Safety Warnings
Ensure that your Linear Sub is set to the appropriate mains input voltage before it
is connected to a mains socket. The warranty does not cover damage caused by
incorrect mains voltage.
Please read all operating and safety instructions before use retaining them for
future reference. Adhere to all warnings on the product or in this manual.
Power sources — The subwoofer should be connected only to a power supply of
the type described on its rear panel. If you are not sure consult your dealer or a
qualified electrician.
Power cord — Power supply cords should be routed so as not to be walked on or
caught under or against items.
Ventilation — To ensure reliable operation and to prevent the subwoofer from
overheating ensure good ventilation. Do not cover the subwoofer and do not
place it closer than 10cm from walls or soft furnishings. Do not use in a built-in
installation unless proper ventilation is provided. Consult your dealer.
Water and moisture — The subwoofer should not be used near water, i.e. near a
wash-bowl, basin, in a wet basement or swimming pool area.
Temperature — The subwoofer may not function correctly at extremely low or
freezing temperatures. The subwoofer should also be sited away from heat sources
such as radiators or other electrical equipment that produces heat, including other
amplifiers.
Electric shock — Care should be taken so that objects are not inserted into
connectors or other apertures and that liquid does not spill into the enclosure.
Never attempt to dismantle the subwoofer as serious electric shock might occur if
the internal parts are touched.
Cleaning — Unplug the subwoofer from the wall power outlet before cleaning.
Any cleaning should only require a soft cloth, slightly dampened if necessary. Be
wary of using any polishes or solvent based cleaning agents.
Smells — If an abnormal smell or smoke is detected, immediately turn the power
off and unplug the subwoofer from the wall power outlet.
1. Introduction
2. Handling
