Before testing your blood glucose: Wash your hands
with soap and warm water; rinse well to remove any
visible or invisible signs of glucose residue from, for
example, food or drink. Dry your hands thoroughly
with a clean towel.
Do not perform a blood
glucose test if the testing
site has not been washed or
is soiled or sticky (for
example, due to glucose
residue from, for example,
food or drink).
Always use a fresh, well-formed blood drop and
perform the test as quickly as possible after lancing.
Do not delay applying the
blood drop to the test area.
Do not perform a blood
glucose test with a smeared
or spread blood drop. Do not
smear the blood drop on the
test area.
When performing the test, place your finger gently on
the guidance tabs so that only the blood drop
comes into contact with the centre of the test area.
Your finger should not make any contact with the test
area. Keep your finger as still as possible.
Do not attempt to force your
finger between the guidance
tabs or apply any direct
pressure to the test area.
Avoid trembling or shaky
movements.
When the beep tone sounds and Test in progress is
displayed on the screen, remove your finger from the
test cassette immediately.
Note: You can only hear the beep tones when they
are turned on. See Setting tones in the User’s
Manual.
Do not keep your finger on
the guidance tabs or apply
pressure to the test area
after the beep tone sounds
and/or Test in progress is
displayed on the screen.
W
IMPORTANT
INFORMATION ON PERFORMING A BLOOD GLUCOSE TEST
An incorrectly performed blood glucose test may lead to incorrect test results which can cause the wrong therapy recommendation to be made and thus produce serious
adverse health effects. Therefore, read the information on how to perform a blood glucose test correctly, carefully.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for ACCU-CHEK Mobile 2018 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of ACCU-CHEK Mobile 2018 in the language / languages: English as an attachment in your email.
The manual is 7,27 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.