IMPORTANT NOTE: The charger used to power this clock must be
suitable and of the correct output voltage (volts) and current (amps)
to charge the smart device.
GETTING STARTED
Plug the USB lead supplied into one of the USB ports at the back of the
clock and connect it to your phone/smart device charger, now plug the
charger into a standard household outlet.
CHARGING YOUR PHONE/SMART DEVICE
Note: You can use either USB port ‘USB.1 or USB.2’ at the back of the
clock to charge or power your device.
Plug the smart devices ‘USB data cable lead’ into the port that you want
to charge from and connect it to your phone/smart device. Your clock
now becomes a hub and can be used to charge most Smartphones,
tablets, e-readers, MP3, bluetooth speakers etc.
SETTING THE TIME
Slide the AL.SET.T.SET.LOCK switch to the T.SET position.
Press the HR (hour) button or MIN (minute) button to set the desired
time. Note - The PM indicator will appear for PM time.
Slide the switch to the LOCK position.
SETTING THE ALARM
Slide the AL.SET.T.SET.LOCK switch to the AL.SET position. Press the HR
(hour) button or MIN (minute) button to set the desired alarm time.
Note - The PM indicator will appear for PM time.
Slide the switch to the LOCK position.
SAFETY
This electric clock may represent a hazard for young children. Keep
this clock out of reach of small children to avoid risk of shock or
possible choking hazard from small parts or batteries.
CHANGING THE BATTERIES
It is recommended that you replace the battery annually. Only
use 1XAA (1.5V) Alkaline battery in this clock. Insert the battery
observing the polarity markings inside the compartment. Do
not mix old and new batteries, dierent types or brands. Remove
the battery if the clock is stored or not in use. Remove exhausted
batteries from the product.
Warning: Do not recharge non-rechargeable batteries.
Please dispose of used batteries in a responsible manner. For more
information please contact your local authority.
MAINTENANCE
A soft paper towel may be used to clean the clock. Do not use
corrosive cleaners or chemical solutions on the clock. Keep the clock
clean and dry to avoid any problems.
YOUR GUARANTEE
Your clock is guaranteed for 12 months from the date of purchase
against any faults arising from defective materials or manufacture.
Damage caused through careless handling, misuse or in transit is
expressly excluded. Should this clock fail within 12 months please
return it in the rst instance to your retailer.
If you have any queries, problems or do not understand any part of
these instructions please contact:
Customer Help Line Locall 0845 1207208 or (01908) 449208
Mon - Fri 9.00am - 4.30pm
email for service: service@acctim.com or visit www.acctim.com
ENVIRONMENTAL PROTECTION
Disposal of electrical and electronic equipment
Do not dispose of this product with household waste. For
the proper treatment, recovery and recycling please take
this product to the appropriate collection point. If you are
unsure of where this is contact your local authority.
Improper disposal may be harmful to the environment.
V.1
LED ALARM CLOCK
Acctim Smart Connector is an innovative new technology which
allows you to use or upcycle your Smartphone charger to reduce
landll. Simply plug the supplied USB lead into the clock and the
other end into your phone/smart device charger. You can now use
your clock to charge/power your smart device.
FEATURES:
Jumbo LED display
Soft touch painted case
Alarm with push case for snooze
USB powered - Just connect to a phone/smart device charger
160cm USB lead supplied
Second USB port to charge Smartphone/tablet/e-reader etc.
Battery back-up requires 1 X AA battery (not included)
Thank you for your purchase of this quality clock. Please read these
instructions carefully and store in a safe place for future reference.
OPTIONAL BATTERY BACK UP
This clock has an optional battery back up feature, designed to retain
the time and alarm settings in the event of a power failure. To use the
battery back up, insert one "AA" battery (1.5 Volt) into the battery
compartment at the back of the clock. If the power fails, the battery
back up will automatically continue running the clock and maintain
the time and alarm settings - Note: The alarm will not sound and the
time display will not function under battery power.
Acctim Smart Connector
USING THE SNOOZE FEATURE
When the alarm sounds, push the top of the clock down to activate
the Snooze feature. The alarm will stop and sound again after
8 to 9 minutes. The alarm bell icon will ash. To stop the snooze
function, slide the AL.OFF/ON switch to the AL.OFF position.
160cm USB data cable
lead supplied
Your devices ‘USB data
cable lead’ (not supplied)
Connect to your
phone/smart device charger
Connect to your
phone/smart device
TO TURN ON/OFF THE ALARM
To turn on/o the alarm slide the AL.ON/OFF switch to the AL.ON
position, the alarm bell icon will appear. When the alarm sounds, slide
the AL.ON/OFF switch to the AL.OFF position.
Front pageBack page
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Acctim Colorado LED Alarm Clock at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Acctim Colorado LED Alarm Clock in the language / languages: English as an attachment in your email.
The manual is 0.48 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
