554031
92
Zoom out
Zoom in
Previous page
1/96
Next page
11-92
Confirm the menu option phone number 1 with the Enter button.
On the system keypad, enter the number with local area code and if necessary a zero for obtaining a dial tone. To
program a dial pause, enter
A. You program the A with the button. Press this button repeatedly until an A
appears.
To change the entered number, press the cursor buttons
and to position the cursor under the
number you want to change.
To delete the entire number, program an
E with the button at the first digit of the number and then save the
entered number with the
button. The number is deleted and does not appear again when this menu option
is displayed.
After successfully entering the number, press
to store the number. Enable the function Remote program
and
Remote listen to operate your system by telephone and listen in to the object over the loudspeaker.
Press
to change the settings to Y and confirm your input with . Press several times to exit
the user menu.
11.7 Triggering a test alarm
Activate your system with the remote control or press the activate button on your system. Following expiry of the exit delay
time (30 seconds), your system is active and monitoring all detectors. Now open the contact detector.
The entry delay time (30 seconds) starts. The system signals this by means of signal tones at one-second intervals.
To deactivate the system, enter the Grand Master PIN
11
22
33
44
, followed by the deactivate button (open padlock).
Close the door and reactivate your system. Wait until the exit delay time expires and then open the contact detector again.
Do not deactivate your system, but wait until the entry delay time expires. After the end of the delay time, an alarm is triggered.
After a short time, you receive a call from to the programmed telephone number. Now deactivate your system and confirm the
call on your telephone. For more information, see the brief guide on telephone control.
11.8 Changing the Grand Master PIN
Now that your system is operational, change the Grand Master PIN.
First press the star button followed by 5.
55
You are asked to enter the Grand Master PIN code for the user menu. The default setting is
1234. Enter this Grand Master
PIN and confirm your input with the lozenge button.
11
22
33
44
You are now in the FM user menu and see the following display:
Press the Enter button three times
and enter the new four-digit Grand Master (SUPER) PIN on the
keypad.
Confirm your input by pressing
.
If you forget your Grand Master PIN, you can change it in the installer menu.
Press
several times to exit the user menu.
92


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus FU9000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus FU9000 in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Abus FU9000

Abus FU9000 User Manual - English - 56 pages

Abus FU9000 Installation Guide - German - 96 pages

Abus FU9000 User Manual - German - 55 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info