755252

Abus E201 Manual

1
Zoom out
Zoom in
Previous page
1/1
Next page
E201 | Circuit Breaker Lockout
User Manual
www.abus.com
07/2015
Subject to technical alterations. No liability for mistakes and printing errors.
©ABUS | D 58292 Wetter | Germany
1. 2.
3.
4. 5.
1. Set the circuit breaker to
the ”Off” position.
2. Place the circuit breaker lockout
device over the switched-off rocker
switch so the black opening lies
around the rocker and the small
teeth grip the rocker from below.
3. Turn the screw wheel clockwise to
attach the circuit breaker lock to
the rocker.
Please note the following:
Make sure that the circuit breaker
cannot be switched back to the “On“
position. The circuit breaker rocker
can still be moved a little, but must
not reach the “On“ position. If it can
do so, you must re-attach the lock or
use the enclosed adapter if necessary.
4. If the lock sits tightly and securely on
the circuit breaker and prevents the
“On” position of the circuit breaker
rocker from being set, please put the
cover over the screw wheel and insert
a padlock through the hole provided.
Using the adapter:
If you cannot insert the lock correctly on the circuit breaker or if it allows too much space for the rocker, use the adapter piece.
The small side tabs of the adapter are clipped into the triangular side openings of the device for this purpose.
You can now attach the lock as previously described. The space for the rocker is markedly reduced by the adapter piece (Fig. 4 & 5).
You will find additional notes and corresponding application videos to every lockout device following the link:
http://www.abus.com/eng/Service/Videos/Industrial-safety
Application:
Material Content:
a. Circuit Breaker Lockout E201 b. Adapter
WARNING:
Product should only be used by personnel properly trained in lockout procedures. Product should only be used on the appropriate application (s).
Follow product instructions for proper application of each product. Properly trained personnel should check to ensure that product is secure and
equipment will not operate. Failure to follow product instructions and warnings may result in serious bodily inury or death.


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus E201 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus E201 in the language / languages: English as an attachment in your email.

The manual is 0,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info