5543
4
Zoom out
Zoom in
Previous page
1/34
Next page
3M
Personal Projector MP7720
1
© 3M IPC 2000
,QWURGXFWLRQ
Caution
TO PREVENT SHOCK, DO NOT OPEN THE CABINET. NO USER –SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. AND
PLEASE READ ALL OF THESE INSTRUCTIONS BEFORE YOU OPERATE YOUR PRO-
JECTOR. KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE .
Safety Instructions
1.Read all of these instructions before you operate your projector and save them
for future reference.
2. The lamp becomes extremely hot during operation. Keep the projector cool for
approximately 45 minutes prior to removing the lamp assembly for replacement.
Do not operate lamps beyond the rated lamp life. Excessive operation of lamps
beyond rated life could cause them to explode in rare occasions.
3. Power is still available when the projector is in the standby mode. Never replace
lamp assembly or any electronic components unless the projector is unplugged.
4. To reduce the risk of electric shock, do not disassemble this appliance. Take it to
a qualified technician when service or repair work is required. Incorrect
reassembly can cause electric shock when the appliance is subsequently used.
5. Do not place this product on an unstable cart, stand, or table. The product may
fall, causing serious damage to the product.
6. This product is capable of displaying inverted images for ceiling mount
configurations. Please use suitable equipment for mounting the unit and make
sure it is securely installed.
7. To prevent the lamp from bursting, change the lamp after changing the
mounting position of the projector (desktop to ceiling mount or ceiling mount to
desktop mount).
Caution
Always open the lens shutter or remove the lens cap when the projector lamp is
on.
Do not look straight at the projector lens during operation. The intense light beam
may damage your eyesight.
In some countries, the line voltage is NOT stable. This projector is designed to
operate safely within a bandwidth of 110 to 230 volts, but could fail if power drops
or surges of
±
10 volts occur. In these high-risk areas, it is recommended to install
a power stabilizer unit.
Save These Instructions: The information contained in this manual will help you
operate and maintain your 3M™ MP7720 Personal Projector.
Downloaded From projector-manual.com 3M Manuals
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 3m MP7720 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 3m MP7720 in the language / languages: English as an attachment in your email.

The manual is 4,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of 3m MP7720

3m MP7720 User Manual - German - 34 pages

3m MP7720 User Manual - Dutch - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info