654481
4
Zoom out
Zoom in
Previous page
1/9
Next page
3M 1700 Operator’s Guide 3
Main Menu
Lamp Changer (1708, 1720, 1750)
If the selected lamp (position 1 or 2) is burned out or missing,
slide lamp changer lever (1) to select alternate lamp.
ü Important
Slide lever fully left or right until it stops.
ü Important
Lamp will not illuminate unless the top cover of the
projector is closed.
High/Low Lamp Control (1708, 1720, 1750)
Activate High/Low switch (3) to select High (brightest) or
Low (normal) lamp illumination.
a. = Brightest image, normal lamp life
b.
= Standard image, extended lamp life
ü Note
Operating the lamp control switch in the LOW setting will
extend the life of the lamp.
Optical Adjustment (1708, 1720, 1750)
Turn the color tuning dial (2) to eliminate any yellow/orange
to brown or blue corners. A color–free projection stage will
produce the sharpest color images.
Lamp Replacement
1. Push power switch to OFFand unplug projector.
2. Release cover latch and lift up top cover.
3. After lamp has cooled, release spring clip
(1) and raise condenser lens frame to access lamp.
4. Pull lamp out (2) and discard.
5. Push new lamp (3) fully and squarely into socket.
Do not touch bulb glass with fingers.
6. Close condenser lens frame and secure with spring clip (1).
7.
Close top cover and plug in power cord.
Caution!
To avoid burns to the fingers, allow projector parts to cool
before replacing lamp.
Caution!
If a lamp cracks or breaks and deposits glass fragments
inside the projector body, use a vacuum cleaner to remove.
Touching sharp glass could result in cuts to your fingers.
EHJ - 250W, 24V (1705, 1708, 1720)
EVD - 400W, 36V (1750)
Caution!
Use care when placing hands inside projector body. Sharp or
rough edges could cause abrasions or cuts to fingers.
Caution!
When the top cover is in the open position, use care not to tip
it over. If the cover slams shut, it could result in pinching or
bruises to your fingers.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 3m 1700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 3m 1700 in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info