603158
22
Zoom out
Zoom in
Previous page
1/24
Next page
20
To avoid sudden changes
in altitude when switching
from auto to standard (STD),
ensure that the left stick is
set to the center position.
Fly a brief test flight to verify
that all controls (throttle, yaw,
roll, and pitch) are responding
normally.
1
Perform a pre-mission
test flight.
If you planned a takeoff waypoint into
your mission, switch to AUTO on the
ground, and raise the throttle to initiate
the mission. If you did not add a takeoff
waypoint, switch to AUTO mode after
takeoff to initiate the mission in flight.
3
Switch to
AUTO.
When the mission is complete and IRIS has landed,
use the controller to switch to standard (STD) then
disarm and proceed with the postflight steps.
If you added an automatic landing waypoint to your
mission, IRIS will disarm automatically after landing.
4
Switch to standard
before disarming.
To recall IRIS during a mission,
use the controller to switch
to standard (STD) and land
manually. Or switch to RTL,
and automatically return to
the launch point.
2
Arm IRIS
in standard.
When you’re ready
to start the mission,
arm IRIS in standard
(STD).
Flying Missions
Stabalize
Altitude Hold
Loiter
Full Autonomy
Return to Launch
Stabalize
Altitude Hold
Loiter
Full Autonomy
Return to Launch
Stabalize
Altitude Hold
Loiter
Full Autonomy
Return to Launch
Stabalize
Altitude Hold
Loiter
Full Autonomy
Return to Launch
Left Stick
For auto-takeoff,
raise throttle to
start mission.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 3DR Iris Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 3DR Iris Plus in the language / languages: English as an attachment in your email.

The manual is 6,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info