477802
38
Zoom out
Zoom in
Previous page
1/42
Next page
Evaluation of Situations in Speakerphone Automatic Dialling without Confirmation
Situation Helios Action
Busy tone
Hangs up in approximately 2 seconds and dials the
next number.
Call or silence without previous
ringing tone
Waits for the preset timeout (log-in time), then hangs
up and dials the next number.
Continuous tone (at the PBX, e.g.)
Hangs up in approximately 2 seconds and dials the
next number.
Ringing tone, which is terminated
before 10 rings are made (the count
of rings is variable)
Regarded as a successful call, continues for the
maximum timeout (maximum call duration).
For details refer to the text under the table.
Ringing tone, 10 rings are made (the
count of rings is variable)
Hangs up and dials the next number.
to ,
These digits are interpreted as password beginning.
Call extension or password beginning.
Hang-up command.
If the ringing tone stops before the predefined count of rings is achieved and the call is thus very
short (e.g. 2 seconds), it is not clear whether the call should be regarded as successful.
Therefore, a new type of automatic dialling has been added - type 4. The difference is as
follows:
Type 3 regards such a call as successful only if the door is opened.
Type 4 regards all such calls as successful.
Automatic Multiple Number Dialling with Confirmation
This mode is used where maximum connection reliability is required – for
emergency calls. The called line (the supervisory control centre, e.g.) must be operated
by a well-trained person to confirm connection. The DTMF is used as the most reliable
criteria for successful connection. The called line must press on its telephone. If the
called number is busy or remains unanswered until the preset timeout or in other cases
(see the table), Helios dials the next number in the sequence.
Evaluation of Situations in Speakerphone Automatic Dialling with Confirmation
Situation Helios Action
Busy tone
Hangs up in approximately 2 seconds and dials the
next number.
Call or silence
Waits for the preset timeout (log-in time), then
hangs up and dials the next number.
Ringing tone
Waits for the preset count of rings, then hangs up
and dials the next number.
Continuous tone (at the PBX,
e.g.)
Hangs up in approximately 2 seconds and dials the
next number.
DTMF char or
Immediately hangs up and dials the next number.
DTMF char
Confirms reception (2 beeps) and the call continue
for the preset time at most (maximum call duration).
These digits are interpreted as control characters -
refer to the DTMF Control subsection.
38
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 2N Helios at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 2N Helios in the language / languages: English as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info